Gorilla Clear Grip, 4 Pack
About this item
- Heavy duty with permanent bond
- Crystal clear formula
- Two 3oz Tubes & Two 0.2oz Tubes
- Fast grab–holds in seconds
- 100% waterproof–for indoor/outdoor use
- Bonds: Metal, glass, fabric, wood, ceramic, leather, paper, plastic, and more
- No-run formula
Gorilla Clear Grip® is a flexible, fast-setting, crystal clear contact adhesive that creates a strong, permanent bond. Gorilla Clear Grip is paintable and waterproof making it great for projects both inside and out! Build, create, repair®!
All surfaces should be clean and free of dirt, grease, and oil. Best if used between 50°F and 90°F. Clear Grip should only be used in a well-ventilated area.
Apply adhesive to each surface to be bonded. To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining surfaces.
Press surfaces firmly together. NOTE: Bond forms immediately and can be difficult to reposition.
Cure Time: Allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces.
Storage Tips: After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals.
Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface.
Paintable: When fully cured.
NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.